My sons car came with the internal one. We got rid of it at the first chance we had and sold it on eBay and went back to the external one.  I think his car came with all the parts for the external one.     In a message dated 5/28/2025 1:03:00 PM Central Daylight Time, julian_kift@hotmail.com writes:    Steven,   I'd reach out to the likes of Dennis Quella and Ron McCall. Dennis was   advocating internal throw out bearings for many years and should have a   stash of clutch forks on the shelf. Likewise, a lot of the GT40 replica   crowd seem to opt for an internal hydraulic throw out too.   Regards,   Julian     __________________________________________________________________   From: STEVEN EDWARDS <gsedwards@cox.net>   Sent: Wednesday, May 28, 2025 8:31 AM   To: Mike Drew via DeTomaso <detomaso@server.detomasolist.com>   Subject: [DeTomaso] stock clutch throw out mechanizm   My friend has a 72 Pantera with a internal throwout bearing. He want to   go back to the stock external throwout shaft and cylinder. We changed   from the stock type 30 years ago and it had not beyond repair. Plus it   has become a pain to take out the transaxle every time to repair or   replace the internal throw out bearing.So does anyone have the complete   shaft type throwout bearing they want to sell him? thanks   Steven Edwards_______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list -- detomaso@server.detomasolist.com To unsubscribe send an email to detomaso-leave@server.detomasolist.com To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. My sons car came with the internal one. We got rid of it at the first chance we had and sold it on eBay and went back to the external one. I think his car came with all the parts for the external one. In a message dated 5/28/2025 1:03:00 PM Central Daylight Time, julian_kift@hotmail.com writes: Steven, I'd reach out to the likes of Dennis Quella and Ron McCall. Dennis was advocating internal throw out bearings for many years and should have a stash of clutch forks on the shelf. Likewise, a lot of the GT40 replica crowd seem to opt for an internal hydraulic throw out too. Regards, Julian __________________________________________________________________ From: STEVEN EDWARDS <[1]gsedwards@cox.net> Sent: Wednesday, May 28, 2025 8:31 AM To: Mike Drew via DeTomaso <[2]detomaso@server.detomasolist.com> Subject: [DeTomaso] stock clutch throw out mechanizm My friend has a 72 Pantera with a internal throwout bearing. He want to go back to the stock external throwout shaft and cylinder. We changed from the stock type 30 years ago and it had not beyond repair. Plus it has become a pain to take out the transaxle every time to repair or replace the internal throw out bearing.So does anyone have the complete shaft type throwout bearing they want to sell him? thanks Steven Edwards _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list -- [3]detomaso@server.detomasolist.com To unsubscribe send an email to [4]detomaso-leave@server.detomasolist.com To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. mailto:gsedwards@cox.net 2. mailto:detomaso@server.detomasolist.com 3. mailto:detomaso@server.detomasolist.com 4. mailto:detomaso-leave@server.detomasolist.com