Re: [DeTomaso] DeTomaso Digest, Vol 147, Issue 33
Kenny, no problem. I had planned to provide more info so thanks for the reminder. Info below. I can’t remember the width I used but I took an old roller (the rubber stock version) and used that as a guide to make the cuts. It didn’t have to be super accurate to fit in the rails. This company is also a good resource for other stuff as well. Mike Drew had pointed folks to it for something else and I really like using them. Thanks, Mike R. Company: Aircraft Spruce & Specialty Co. Item info: 02-52001 DELRIN ROD 1" (NATURAL) Price: $5.50 for 12” plus shipping Link: (http://www.aircraftspruce.com/catalog/mepages/delrinrod.php?clickkey=3080063) OK, cough it up! What size Delrin (Diameter) and where did you find it online? I need to fix mine in the worst way! Kenny From: Mike Reilly <reillyms@live.com> To: Mike Drew via DeTomaso <detomaso@server.detomasolist.com>, "fred@creekspeak.com" <fred@creekspeak.com> Subject: Re: [DeTomaso] Seat Slide Rattles Message-ID: <BAY405-EAS180D18A2FAED123987A18CFBACD0@phx.gbl> Content-Type: text/plain; charset="utf-8" I just updated mine to Delrin after researching on the PI Forum for possible solutions. I saw the vendors sold at set of eight new Delrin rollers for about $80 but a simple internet search netted a one foot rod that was the correct diameter for about $8. I bought it and then cut it to the correct width with a hacksaw to make eight of them. I just put the seats in a few weeks ago and they slide great and I don?t hear any noise from them at all. It?s an easy way to go IMHO. Mike R. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. Kenny, no problem. I had planned to provide more info so thanks for the reminder. Info below. I can't remember the width I used but I took an old roller (the rubber stock version) and used that as a guide to make the cuts. It didn't have to be super accurate to fit in the rails. This company is also a good resource for other stuff as well. Mike Drew had pointed folks to it for something else and I really like using them. Thanks, Mike R. Company: Aircraft Spruce & Specialty Co. Item info: 02-52001 DELRIN ROD 1" (NATURAL) Price: $5.50 for 12" plus shipping Link: (http://www.aircraftspruce.com/catalog/mepages/delrinrod.php?clickkey=3 080063) OK, cough it up! What size Delrin (Diameter) and where did you find it online? I need to fix mine in the worst way! Kenny From: Mike Reilly <reillyms@live.com> To: Mike Drew via DeTomaso <detomaso@server.detomasolist.com>, "fred@creekspeak.com" <fred@creekspeak.com> Subject: Re: [DeTomaso] Seat Slide Rattles Message-ID: <BAY405-EAS180D18A2FAED123987A18CFBACD0@phx.gbl> Content-Type: text/plain; charset="utf-8" I just updated mine to Delrin after researching on the PI Forum for possible solutions. I saw the vendors sold at set of eight new Delrin rollers for about $80 but a simple internet search netted a one foot rod that was the correct diameter for about $8. I bought it and then cut it to the correct width with a hacksaw to make eight of them. I just put the seats in a few weeks ago and they slide great and I don?t hear any noise from them at all. It?s an easy way to go IMHO. Mike R. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com [1]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. http://server.detomasolist.com/mailman/listinfo/detomaso
This kind of material is also available at McMaster Carr. Ken From: Mike Reilly <reillyms@live.com> To: Kenny Hall <Kenny.Hall@Servatron.com>; "detomaso@server.detomasolist.com" <detomaso@server.detomasolist.com> Sent: Tuesday, September 27, 2016 12:33 PM Subject: Re: [DeTomaso] DeTomaso Digest, Vol 147, Issue 33 Kenny, no problem. I had planned to provide more info so thanks for the reminder. Info below. I can't remember the width I used but I took an old roller (the rubber stock version) and used that as a guide to make the cuts. It didn't have to be super accurate to fit in the rails. This company is also a good resource for other stuff as well. Mike Drew had pointed folks to it for something else and I really like using them. Thanks, Mike R. Company: Aircraft Spruce & Specialty Co. Item info: 02-52001 DELRIN ROD 1" (NATURAL) Price: $5.50 for 12" plus shipping Link: (http://www.aircraftspruce.com/catalog/mepages/delrinrod.php?clickkey=3 080063) OK, cough it up! What size Delrin (Diameter) and where did you find it online? I need to fix mine in the worst way! Kenny From: Mike Reilly <reillyms@live.com> To: Mike Drew via DeTomaso <detomaso@server.detomasolist.com>, "fred@creekspeak.com" <fred@creekspeak.com> Subject: Re: [DeTomaso] Seat Slide Rattles Message-ID: <BAY405-EAS180D18A2FAED123987A18CFBACD0@phx.gbl> Content-Type: text/plain; charset="utf-8" I just updated mine to Delrin after researching on the PI Forum for possible solutions. I saw the vendors sold at set of eight new Delrin rollers for about $80 but a simple internet search netted a one foot rod that was the correct diameter for about $8. I bought it and then cut it to the correct width with a hacksaw to make eight of them. I just put the seats in a few weeks ago and they slide great and I don?t hear any noise from them at all. It?s an easy way to go IMHO. Mike R. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com [1]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. http://server.detomasolist.com/mailman/listinfo/detomaso _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. This kind of material is also available at McMaster Carr. Ken __________________________________________________________________ From: Mike Reilly <reillyms@live.com> To: Kenny Hall <Kenny.Hall@Servatron.com>; "detomaso@server.detomasolist.com" <detomaso@server.detomasolist.com> Sent: Tuesday, September 27, 2016 12:33 PM Subject: Re: [DeTomaso] DeTomaso Digest, Vol 147, Issue 33 Kenny, no problem. I had planned to provide more info so thanks for the reminder. Info below. I can't remember the width I used but I took an old roller (the rubber stock version) and used that as a guide to make the cuts. It didn't have to be super accurate to fit in the rails. This company is also a good resource for other stuff as well. Mike Drew had pointed folks to it for something else and I really like using them. Thanks, Mike R. Company: Aircraft Spruce & Specialty Co. Item info: 02-52001 DELRIN ROD 1" (NATURAL) Price: $5.50 for 12" plus shipping Link: ([1]http://www.aircraftspruce.com/catalog/mepages/delrinrod.php?clickke y=3 080063) OK, cough it up! What size Delrin (Diameter) and where did you find it online? I need to fix mine in the worst way! Kenny From: Mike Reilly <[2]reillyms@live.com> To: Mike Drew via DeTomaso <[3]detomaso@server.detomasolist.com>, "[4]fred@creekspeak.com" <[5]fred@creekspeak.com> Subject: Re: [DeTomaso] Seat Slide Rattles Message-ID: <[6]BAY405-EAS180D18A2FAED123987A18CFBACD0@phx.gbl> Content-Type: text/plain; charset="utf-8" I just updated mine to Delrin after researching on the PI Forum for possible solutions. I saw the vendors sold at set of eight new Delrin rollers for about $80 but a simple internet search netted a one foot rod that was the correct diameter for about $8. I bought it and then cut it to the correct width with a hacksaw to make eight of them. I just put the seats in a few weeks ago and they slide great and I don?t hear any noise from them at all. It?s an easy way to go IMHO. Mike R. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [7]DeTomaso@server.detomasolist.com [1][8]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. [9]http://server.detomasolist.com/mailman/listinfo/detomaso _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [10]DeTomaso@server.detomasolist.com [11]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. http://www.aircraftspruce.com/catalog/mepages/delrinrod.php?clickkey=3 2. mailto:reillyms@live.com 3. mailto:detomaso@server.detomasolist.com 4. mailto:fred@creekspeak.com 5. mailto:fred@creekspeak.com 6. mailto:BAY405-EAS180D18A2FAED123987A18CFBACD0@phx.gbl 7. mailto:DeTomaso@server.detomasolist.com 8. http://server.detomasolist.com/mailman/listinfo/detomaso 9. http://server.detomasolist.com/mailman/listinfo/detomaso 10. mailto:DeTomaso@server.detomasolist.com 11. http://server.detomasolist.com/mailman/listinfo/detomaso
participants (2)
-
Ken Green
-
Mike Reilly