Mike,
It gets even better, that looks to be a different idler again, the one that was previously linked appears to go in the stock location, but was adjustable from the front negating the usual need to get a wrench on the rear. Julian __________________________________________________________________
From: DeTomaso <detomaso-bounces@server.detomasolist.com> on behalf of Mike Drew via DeTomaso <detomaso@server.detomasolist.com> Sent: Friday, September 16, 2016 2:11 PM To: David Nunn Cc: <detomaso@server.detomasolist.com> Subject: Re: [DeTomaso] Sanden Compressors noises
Rob,
If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit. It eliminates the "fitted", non-adjustable belt and makes it adjustable. It sure makes installation a lot easier. It's not listed on IPSCO's web site so you have to call or e-mail to get details.
Also, IPSCO has an idler pulley kit that makes installation and belt tensioning a breeze.
[1]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
References
1. [1]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm [2][Idler%20Pulley.jpg] [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ... www.ipsco.org<http://www.ipsco.org> Pantera Idler Pulley Assembly . Replacement for factory Idler Pulley,
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com [4]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the
All, Here is a photo of the IPSCO water pump idler pulley setup. Note there is no alternator in view, as this car is fitted with a flat firewall kit that moves the alternator outboard of the A/C system. [cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f@namprd18.prod.outlook.com] Mike Sent from my iPhone On Sep 15, 2016, at 15:41, "David Nunn" <dnunn@telus.net> wrote: this assembly allow adjustment without trying to hold a wrench behind the bracket to tighten in ... list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com [5]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
References
1. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 2. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 3. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 4. http://server.detomasolist.com/mailman/listinfo/detomaso 5. http://server.detomasolist.com/mailman/listinfo/detomaso _______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use
David, Thanks I need both of those.... that is after I have re-installed A/C. I went to install the flat bulkhead kit prior to my Monterey trip and after sending my bulkhead out to Kirk to modify (he didn't have a pattern for the later 9000 series cars). I got as far as pulling the belts out the package for trial fit and thought, oh wait I don't have an A/C compressor installed! Doh! Julian ________________________________ From: David Nunn <dnunn@telus.net> Sent: Friday, September 16, 2016 3:04 PM To: 'Mike Drew'; 'Julian Kift' Cc: detomaso@server.detomasolist.com Subject: RE: [DeTomaso] Sanden Compressors noises Julian, Further to what Mike wrote; here's a photo of the front of my engine, with both IPSCO items installed. David -----Original Message----- From: Mike Drew [mailto:MikeLDrew@aol.com] Sent: September 16, 2016 2:19 PM To: Julian Kift <julian_kift@hotmail.com> Cc: David Nunn <dnunn@telus.net>; detomaso@server.detomasolist.com Subject: Re: [DeTomaso] Sanden Compressors noises Julian, Yes, he mentioned two different products for different applications but only had a link for the stock replacement idler. My photo shows the idler that replaces the alternator to tension the water pump belt. Mike Sent from my iPhone On Sep 16, 2016, at 14:16, Julian Kift <julian_kift@hotmail.com> wrote: the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. David, Thanks I need both of those.... that is after I have re-installed A/C. I went to install the flat bulkhead kit prior to my Monterey trip and after sending my bulkhead out to Kirk to modify (he didn't have a pattern for the later 9000 series cars). I got as far as pulling the belts out the package for trial fit and thought, oh wait I don't have an A/C compressor installed! Doh! Julian __________________________________________________________________ From: David Nunn <dnunn@telus.net> Sent: Friday, September 16, 2016 3:04 PM To: 'Mike Drew'; 'Julian Kift' Cc: detomaso@server.detomasolist.com Subject: RE: [DeTomaso] Sanden Compressors noises Julian, Further to what Mike wrote; here's a photo of the front of my engine, with both IPSCO items installed. David -----Original Message----- From: Mike Drew [[1]mailto:MikeLDrew@aol.com] Sent: September 16, 2016 2:19 PM To: Julian Kift <julian_kift@hotmail.com> Cc: David Nunn <dnunn@telus.net>; detomaso@server.detomasolist.com Subject: Re: [DeTomaso] Sanden Compressors noises Julian, Yes, he mentioned two different products for different applications but only had a link for the stock replacement idler. My photo shows the idler that replaces the alternator to tension the water pump belt. Mike Sent from my iPhone On Sep 16, 2016, at 14:16, Julian Kift <julian_kift@hotmail.com> wrote:
Mike,
It gets even better, that looks to be a different idler again, the one that was previously linked appears to go in the stock location, but was adjustable from the front negating the usual need to get a wrench on the rear. Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces@server.detomasolist.com> on behalf
Mike Drew via DeTomaso <detomaso@server.detomasolist.com> Sent: Friday, September 16, 2016 2:11 PM To: David Nunn Cc: <detomaso@server.detomasolist.com> Subject: Re: [DeTomaso] Sanden Compressors noises
All, Here is a photo of the IPSCO water pump idler pulley setup. Note
of there
is no alternator in view, as this car is fitted with a flat firewall kit that moves the alternator outboard of the A/C system.
Rob,
If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit. It eliminates the "fitted", non-adjustable belt and makes it adjustable. It sure makes installation a lot easier. It's not listed on IPSCO's web site so you have to call or e-mail to get details.
Also, IPSCO has an idler pulley kit that makes installation and belt tensioning a breeze.
[1]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
References
1. [1]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm [2][Idler%20Pulley.jpg] [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ... [2]www.ipsco.org Pantera Idler Pulley Assembly . Replacement for factory Idler Pulley,
Mike Sent from my iPhone On Sep 15, 2016, at 15:41, "David Nunn" <dnunn@telus.net> wrote: this assembly allow adjustment without trying to hold a wrench behind the bracket to tighten in ...
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com [4]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of
list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com [5]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
References
1. [3]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 2. [4]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 3. [5]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 4. [6]http://server.detomasolist.com/mailman/listinfo/detomaso 5. [7]http://server.detomasolist.com/mailman/listinfo/detomaso _______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com [8]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use
[cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f@namprd18.prod.outlook.com] the the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. mailto:MikeLDrew@aol.com 2. http://www.ipsco.org/ 3. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 4. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 5. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 6. http://server.detomasolist.com/mailman/listinfo/detomaso 7. http://server.detomasolist.com/mailman/listinfo/detomaso 8. http://server.detomasolist.com/mailman/listinfo/detomaso