Hi Thomas, It's the plastic layer (PVB) that fails. I don't think anything can reverse or stop it. Weird since it has been stocked and by that should not have been affected by high temperature and humidity fluctuations (like if it had been installed on a car). Hopefully the rubber will mask some of it. I suggest you contact Sicurvetro <https://www.sicurvetro.com/>. Don't know if Antti Wihanto is around anymore but explain the issue and you might get a discount. /björn On Tue, May 13, 2025 at 2:34 PM Thomas Tornblom <thomas@hax.se> wrote:
I'm about to install a new windscreen that I've had in the attic for many years, and when I look at the edges, it has started to delaminate :(
Is there a way to fix this, or stop it from progressing?
I've asked a couple of car glass installers, and they said no, not as far as they know.
I'm wondering if there is anything that one could wick in between the panes that would fill the void? It has not started discoloring.
Supposedly good Finnish windscreen.
Cheers, Thomas
-- Real life: Thomas Törnblom Email: thomas@hax.se Snail mail: Banvallsvägen 14 Mobile: +46 76 209 8320 S - 754 40 Uppsala, Sweden_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list -- detomaso@server.detomasolist.com To unsubscribe send an email to detomaso-leave@server.detomasolist.com
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-- Björn Carlsson Västra Nygatan 4 SE 57771 Virserum, Sweden Tel. +46 708 983430 Hi Thomas, It's the plastic layer (PVB) that fails. I don't think anything can reverse or stop it. Weird since it has been stocked and by that should not have been affected by high temperature and humidity fluctuations (like if it had been installed on a car). Hopefully the rubber will mask some of it. I suggest you contact [1]Sicurvetro. Don't know if Antti Wihanto is around anymore but explain the issue and you might get a discount. /björn On Tue, May 13, 2025 at 2:34 PM Thomas Tornblom <[2]thomas@hax.se> wrote: I'm about to install a new windscreen that I've had in the attic for many years, and when I look at the edges, it has started to delaminate :( Is there a way to fix this, or stop it from progressing? I've asked a couple of car glass installers, and they said no, not as far as they know. I'm wondering if there is anything that one could wick in between the panes that would fill the void? It has not started discoloring. Supposedly good Finnish windscreen. Cheers, Thomas -- Real life: Thomas Törnblom Email: [3]thomas@hax.se Snail mail: Banvallsvägen 14 Mobile: +46 76 209 8320 S - 754 40 Uppsala, Sweden_______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list -- [4]detomaso@server.detomasolist.com To unsubscribe send an email to [5]detomaso-leave@server.detomasolist.com To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. -- Björn Carlsson Västra Nygatan 4 SE 57771 Virserum, Sweden Tel. +46 708 983430 References 1. https://www.sicurvetro.com/ 2. mailto:thomas@hax.se 3. mailto:thomas@hax.se 4. mailto:detomaso@server.detomasolist.com 5. mailto:detomaso-leave@server.detomasolist.com