Forwarded from David….
From: DAVID D GOODWIN <goodwinpantera@comcast.net> Date: May 29, 2025 at 11:23:07 PDT To: Mike Drew <mikeldrew@aol.com> Subject: Re: [DeTomaso] Re: shaft throw out bearing
I had to shorten my throw out bearing even after taking the 3 shims out. I discovered my throwout bearing was tight against the clutch fingers when I replaced my pressure plate and disc. Good thing my friend is a machinist.
Forwarded from David…. From: DAVID D GOODWIN <goodwinpantera@comcast.net> Date: May 29, 2025 at 11:23:07 PDT To: Mike Drew <mikeldrew@aol.com> Subject: Re: [DeTomaso] Re: shaft throw out bearing I had to shorten my throw out bearing even after taking the 3 shims out. I discovered my throwout bearing was tight against the clutch fingers when I replaced my pressure plate and disc. Good thing my friend is a machinist. Bearing1.jpg McLeod.jpg
