Mike,
It gets even better, that looks to be a different idler again, the one that was previously linked appears to go in the stock location, but was adjustable from the front negating the usual need to get a wrench on the rear. Julian __________________________________________________________________
From: DeTomaso <detomaso-bounces@server.detomasolist.com> on behalf of Mike Drew via DeTomaso <detomaso@server.detomasolist.com> Sent: Friday, September 16, 2016 2:11 PM To: David Nunn Cc: <detomaso@server.detomasolist.com> Subject: Re: [DeTomaso] Sanden Compressors noises
Rob,
If I'm not mistaken, IPSCO sells a kit that modifies Kirk's kit. It eliminates the "fitted", non-adjustable belt and makes it adjustable. It sure makes installation a lot easier. It's not listed on IPSCO's web site so you have to call or e-mail to get details.
Also, IPSCO has an idler pulley kit that makes installation and belt tensioning a breeze.
[1]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm
References
1. [1]http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm [2][Idler%20Pulley.jpg] [3]Idler Pulley - IPSCO, Pantera, Viper, Mechanical Parking ... www.ipsco.org Pantera Idler Pulley Assembly . Replacement for factory Idler Pulley,
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com [4]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the
All, Here is a photo of the IPSCO water pump idler pulley setup. Note there is no alternator in view, as this car is fitted with a flat firewall kit that moves the alternator outboard of the A/C system. [cid:da0fdac9-8741-4e03-b676-ebaa4760fb6f@namprd18.prod.outlook.com] Mike Sent from my iPhone On Sep 15, 2016, at 15:41, "David Nunn" <dnunn@telus.net> wrote: this assembly allow adjustment without trying to hold a wrench behind the bracket to tighten in ... list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com [5]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
References
1. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 2. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 3. http://www.ipsco.org/Pantera%20Parts/Idler%20Pulley.htm 4. http://server.detomasolist.com/mailman/listinfo/detomaso 5. http://server.detomasolist.com/mailman/listinfo/detomaso _______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use
Julian, Further to what Mike wrote; here's a photo of the front of my engine, with both IPSCO items installed. David -----Original Message----- From: Mike Drew [mailto:MikeLDrew@aol.com] Sent: September 16, 2016 2:19 PM To: Julian Kift <julian_kift@hotmail.com> Cc: David Nunn <dnunn@telus.net>; detomaso@server.detomasolist.com Subject: Re: [DeTomaso] Sanden Compressors noises Julian, Yes, he mentioned two different products for different applications but only had a link for the stock replacement idler. My photo shows the idler that replaces the alternator to tension the water pump belt. Mike Sent from my iPhone On Sep 16, 2016, at 14:16, Julian Kift <julian_kift@hotmail.com> wrote: the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
