Pantera Place: http://www.panteraplace.com/ has descriptions of removing the stock bushings. Ken From: "Joseph F. Byrd, Jr." <byrdjf@embarqmail.com> To: detomaso@server.detomasolist.com Sent: Friday, May 20, 2016 8:53 AM Subject: [DeTomaso] SOBill's suspension tool kit Is there a previous write up with photos, drawings and instructions of this kit. Joe/5177/NC -----Original Message----- From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf Of Ken Green via DeTomaso Sent: Friday, May 20, 2016 11:28 AM To: Rod Kunishige; detomaso@server.detomasolist.com Subject: Re: [DeTomaso] FW: Let's get to talking Hi Rod, Hope all is well with you. Wanted to let you know that Bill (SOBill) has handed off a set of tools to me to press out the factory control arm bushings. I promised to make them available to anyone who can pick them up and return them after use. Bill said he originally mailed them to people, but because of the weight of some of the pieces, the packages were tearing and parts were lost, so he gave up on that. It is pretty much all you need to do the work. I added a carbide tipped hole saw that is needed to cut away a flange on the outer sleeve and it makes the job faster and easier. Ken _______________________________________________ Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Pantera Place: http://www.panteraplace.com/ has descriptions of removing the stock bushings. Ken __________________________________________________________________ From: "Joseph F. Byrd, Jr." <byrdjf@embarqmail.com> To: detomaso@server.detomasolist.com Sent: Friday, May 20, 2016 8:53 AM Subject: [DeTomaso] SOBill's suspension tool kit Is there a previous write up with photos, drawings and instructions of this kit. Joe/5177/NC -----Original Message----- From: DeTomaso [mailto:[1]detomaso-bounces@server.detomasolist.com] On Behalf Of Ken Green via DeTomaso Sent: Friday, May 20, 2016 11:28 AM To: Rod Kunishige; [2]detomaso@server.detomasolist.com Subject: Re: [DeTomaso] FW: Let's get to talking Hi Rod, Hope all is well with you. Wanted to let you know that Bill (SOBill) has handed off a set of tools to me to press out the factory control arm bushings. I promised to make them available to anyone who can pick them up and return them after use. Bill said he originally mailed them to people, but because of the weight of some of the pieces, the packages were tearing and parts were lost, so he gave up on that. It is pretty much all you need to do the work. I added a carbide tipped hole saw that is needed to cut away a flange on the outer sleeve and it makes the job faster and easier. Ken _______________________________________________ Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [3]DeTomaso@server.detomasolist.com [4]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. References 1. mailto:detomaso-bounces@server.detomasolist.com 2. mailto:detomaso@server.detomasolist.com 3. mailto:DeTomaso@server.detomasolist.com 4. http://server.detomasolist.com/mailman/listinfo/detomaso