Are your door panels actually a pressed cardboard type? I am working on mine right now and they are made of some kind plastic definitely not the cardboard type most older cars have. Another Pantera mystery? Peter check out our website at: www.whitehorseranch.com
From: michaelbarnessrt10@hotmail.co.uk Date: Sat, 18 Jun 2016 10:28:08 +0100 To: MikeLDrew@aol.com CC: detomaso@server.detomasolist.com Subject: Re: [DeTomaso] Door cards.
Thanks for the replies, it makes perfect sense to replace the plastic " gasket" to prevent warpage of the hardboard door card. Incidentally mine have small clear viewing panels in the plastic, what the hell are they for?
Sent by Michael Barnes
On 17 Jun 2016, at 21:21, Mike Drew <MikeLDrew@aol.com> wrote:
Doors should have a thick plastic sheet glued to the metal frame of the door. Garbage bag isn't thick enough....
Mike
Sent from my iPhone
On Jun 17, 2016, at 12:58, "Scott Mead Photography" <scott@scottmeadphotography.com> wrote:
I know my door cards don't have a plastic backer (and really should). What would be the best vapor barrier to use? Tyvek, 3-mil polyethylene sheeting or something else?
Mahalo,
Scott
-----Original Message----- From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf Of Mike Drew via DeTomaso Sent: Friday, June 17, 2016 9:48 AM To: Michael Barnes Cc: Detomaso Subject: Re: [DeTomaso] Door cards.
Michael,
Water is designed to flow through the doors. There are drains at the bottom which should be clear, and any debris in the door should be vacuumed up to keep from turning to mud which rusts the doors from the inside.
The only reason for the plastic is to prevent rainwater/washing water from soaking the back side of the card. It should therefore be retained.
Mike
Sent from my iPhone
On Jun 17, 2016, at 10:13, Michael Barnes <michaelbarnessrt10@hotmail.co.uk> wrote:
Hi all,just fitted a pair of new door mirrors and was in the process of refitting the door cards when I remembered a piece of advice a friends dad gave me forty years ago ( yeah I know) " don't put the plastic back on the door behind the card as it causes condensation and inevitably corrosion" What do you guys think, leave the plastic on or bin it?
Thanks for any input
Michael
Sent from my iPad _______________________________________________
Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________
Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
From: michaelbarnessrt10@hotmail.co.uk Date: Sat, 18 Jun 2016 10:28:08 +0100 To: MikeLDrew@aol.com CC: detomaso@server.detomasolist.com Subject: Re: [DeTomaso] Door cards.
Thanks for the replies, it makes perfect sense to replace the plastic " gasket" to prevent warpage of the hardboard door card. Incidentally mine have small clear viewing panels in the plastic, what the hell are they for?
Sent by Michael Barnes
On 17 Jun 2016, at 21:21, Mike Drew <MikeLDrew@aol.com> wrote:
Doors should have a thick plastic sheet glued to the metal frame of
Mike
Sent from my iPhone
On Jun 17, 2016, at 12:58, "Scott Mead Photography"
<scott@scottmeadphotography.com> wrote:
I know my door cards don't have a plastic backer (and really
should). What
would be the best vapor barrier to use? Tyvek, 3-mil polyethylene sheeting or something else?
Mahalo,
Scott
-----Original Message----- From: DeTomaso [mailto:detomaso-bounces@server.detomasolist.com] On Behalf Of Mike Drew via DeTomaso Sent: Friday, June 17, 2016 9:48 AM To: Michael Barnes Cc: Detomaso Subject: Re: [DeTomaso] Door cards.
Michael,
Water is designed to flow through the doors. There are drains at
which should be clear, and any debris in the door should be vacuumed up to keep from turning to mud which rusts the doors from the inside.
The only reason for the plastic is to prevent rainwater/washing water from soaking the back side of the card. It should therefore be retained.
Mike
Sent from my iPhone
On Jun 17, 2016, at 10:13, Michael Barnes <michaelbarnessrt10@hotmail.co.uk> wrote:
Hi all,just fitted a pair of new door mirrors and was in the
of refitting the door cards when I remembered a piece of advice a friends dad gave me forty years ago ( yeah I know) " don't put the plastic back on the door behind the card as it causes condensation and inevitably corrosion" What do you guys think, leave the plastic on or bin it?
Thanks for any input
Michael
Sent from my iPad _______________________________________________
Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the
They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________
Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the
They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________
Detomaso Forum NO LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the
Are your door panels actually a pressed cardboard type? I am working on mine right now and they are made of some kind plastic definitely not the cardboard type most older cars have. Another Pantera mystery? Peter check out our website at: [1]www.whitehorseranch.com the door. Garbage bag isn't thick enough.... the bottom process list. list. list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. http://www.whitehorseranch.com/