John, although a few US vendors have these as used parts, be aware the bracket is made of 1/4" mild steel plate and without the idler pulley, the thing totals around 16 lbs. So shipping to NZ will probably equal the cost of the part. For an original part, try <larrs@panteraparts.com> in Carson City, NV. They are not difficult to make but first you'll need such a part to duplicate, plus a 351-C long block to get the bolt hole positions correct. I made one from 1/4" aluminum plate many years ago, which weighed 3 lbs. My original went to Brisbane for a friends Pantera. I have no idea where an engineering dwg could be found. Good luck- J Deryke -----Original Message----- From: John Bennett <jbennett111@zoho.com> To: detomaso <detomaso@server.detomasolist.com> Sent: Tue, Jul 19, 2016 10:41 pm Subject: [DeTomaso] detomaso pantera alternator bracket Does anyone have a spare pantera alternator bracket or know where to get one? Maybe just the blueprint specs for one and I could have it made? Cheer, John Sent using [1]Zoho Mail References 1. https://www.zoho.com/mail/ _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. John, although a few US vendors have these as used parts, be aware the bracket is made of 1/4" mild steel plate and without the idler pulley, the thing totals around 16 lbs. So shipping to NZ will probably equal the cost of the part. For an original part, try <larrs@panteraparts.com> in Carson City, NV. They are not difficult to make but first you'll need such a part to duplicate, plus a 351-C long block to get the bolt hole positions correct. I made one from 1/4" aluminum plate many years ago, which weighed 3 lbs. My original went to Brisbane for a friends Pantera. I have no idea where an engineering dwg could be found. Good luck- J Deryke -----Original Message----- From: John Bennett <jbennett111@zoho.com> To: detomaso <detomaso@server.detomasolist.com> Sent: Tue, Jul 19, 2016 10:41 pm Subject: [DeTomaso] detomaso pantera alternator bracket Does anyone have a spare pantera alternator bracket or know where to get one? Maybe just the blueprint specs for one and I could have it made? Cheer, John Sent using [1]Zoho Mail References 1. [1]https://www.zoho.com/mail/ _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [2]DeTomaso@server.detomasolist.com [3]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. https://www.zoho.com/mail/ 2. mailto:DeTomaso@server.detomasolist.com 3. http://server.detomasolist.com/mailman/listinfo/detomaso