Actually, while correcting "your" versus "you're" might be the behavior of a spelling Nazi, correcting the spelling of a part someone is looking for is helpful. However, these things have become so expensive, if you are not into urber original, there must be something just as good (assuming they really serve any purpose) that is a lot less expensive. Ken (if I could spell better, I'd get a real job) From: Dennis Valdez via DeTomaso <detomaso@server.detomasolist.com> To: "gonancy@juno.com" <gonancy@juno.com> Cc: detomaso@detomasolist.com Sent: Sunday, July 3, 2016 6:23 PM Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners
On Jul 2, 2016, at 12:43 PM, "gonancy@juno.com" <gonancy@juno.com> wrote:
Dzus fasteners, they're spelled Dzus fasteners.
The Spell Nazi still vigilant
Please note: message attached
From: James coyne <tecnosound@hotmail.com> To: John Bennett <jbennett111@zoho.com>, detomaso <detomaso@detomasolist.com> Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners Date: Fri, 1 Jul 2016 23:10:50 -0700
____________________________________________________________ Affordable Wireless Plans Set up is easy. Get online in minutes. Starting at only $9.95 per month! www.netzero.net?refcd=nzmem0216 John , I have a 1971 , 1972 and 1985 . I did a quick check and determined that the 1985 GT5-s is spaced differently than the 1972 pre L . I can supply The specs you need for your 74 if someone can verify that they are the same as the 71 or 72 . - Jim Date: Fri, 1 Jul 2016 22:31:12 -0700 From: jbennett111@zoho.com To: detomaso@detomasolist.com Subject: [DeTomaso] Proper placement of Zeus Fasteners
Let me start over. Apologies Would anyone happen to know the proper placement, spacing, and dimensions of the Zeus Fastener holes for the rear remov able boot (trunk)? Someone welded and bogged mine over in order to paint the eng ine bay. Is there a difference between the model years?I could use the removable bit as a template but I am missing that as well.Kind regards,JohnSent using Zoh o Mail
_______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomasoTo manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
On Jul 2, 2016, at 12:43 PM, "[1]gonancy@juno.com" <[2]gonancy@juno.com> wrote:
Dzus fasteners, they're spelled Dzus fasteners.
The Spell Nazi still vigilant
Please note: message attached
From: James coyne <[3]tecnosound@hotmail.com> To: John Bennett <[4]jbennett111@zoho.com>, detomaso <[5]detomaso@detomasolist.com> Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners Date: Fri, 1 Jul 2016 23:10:50 -0700
____________________________________________________________ Affordable Wireless Plans Set up is easy. Get online in minutes. Starting at only $9.95 per month! www.netzero.net?refcd=nzmem0216 John , I have a 1971 , 1972 and 1985 . I did a quick check and determined that the 1985 GT5-s is spaced differently than the 1972
L . I can supply The specs you need for your 74 if someone can verify that they are the same as the 71 or 72 . - Jim Date: Fri, 1 Jul 2016 22:31:12 -0700 From: [6]jbennett111@zoho.com To: [7]detomaso@detomasolist.com Subject: [DeTomaso] Proper placement of Zeus Fasteners
Let me start over. Apologies Would anyone happen to know
placement, spacing, and dimensions of the Zeus Fastener holes for the rear remov able boot (trunk)? Someone welded and bogged mine over in order to
ine bay. Is there a difference between the model years?I could use
bit as a template but I am missing that as well.Kind regards,JohnSent using Zoh o Mail
_______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [8]DeTomaso@server.detomasolist.com [9]http://server.detomasolist.com/mailman/listinfo/detomasoTo manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [10]DeTomaso@server.detomasolist.com [11]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the
Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso@server.detomasolist.com http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. Actually, while correcting "your" versus "you're" might be the behavior of a spelling Nazi, correcting the spelling of a part someone is looking for is helpful. However, these things have become so expensive, if you are not into urber original, there must be something just as good (assuming they really serve any purpose) that is a lot less expensive. Ken (if I could spell better, I'd get a real job) __________________________________________________________________ From: Dennis Valdez via DeTomaso <detomaso@server.detomasolist.com> To: "gonancy@juno.com" <gonancy@juno.com> Cc: detomaso@detomasolist.com Sent: Sunday, July 3, 2016 6:23 PM Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners pre the proper paint the eng the removable list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. _______________________________________________ Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list [12]DeTomaso@server.detomasolist.com [13]http://server.detomasolist.com/mailman/listinfo/detomaso To manage your subscription (change email address, unsubscribe, etc.) use the links above. Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. References 1. mailto:gonancy@juno.com 2. mailto:gonancy@juno.com 3. mailto:tecnosound@hotmail.com 4. mailto:jbennett111@zoho.com 5. mailto:detomaso@detomasolist.com 6. mailto:jbennett111@zoho.com 7. mailto:detomaso@detomasolist.com 8. mailto:DeTomaso@server.detomasolist.com 9. http://server.detomasolist.com/mailman/listinfo/detomaso 10. mailto:DeTomaso@server.detomasolist.com 11. http://server.detomasolist.com/mailman/listinfo/detomaso 12. mailto:DeTomaso@server.detomasolist.com 13. http://server.detomasolist.com/mailman/listinfo/detomaso